Eccotemp L7-Pump Bundle

The Eccotemp L7 Portable Tankless Water Heater is the latest model in our product line! With a stylish new look and a higher capacity than the L5, the L7 is in a league of its own. The Eccotemp L7 also features an upgraded chrome shower head with stainless steel hose! The Eccotemp L7 Portable Tankless Water Heater is perfect for campsites, cabins, or simply around the house. Wash your car, wash your boat, take a hot shower, or wash the dogs or the horse. You can add the Eccotemp L7 Portable Water Heater to a pressure washer for an even better cleaning! The ignition is with 2 "D" cell batteries so it makes it great for off grid or other areas where electricity is not readily available.

The ideal operating range for the Eccotemp L7 Portable Tankless Water Heater is 20-80 PSI. The L7 will offer a 30 to 35 degree rise at 1.6 gallons per minute. The system also works great on modified water systems with items such as a 12 volt pump. The Eccotemp L7 is capable of reaching temperatures between 50 to 125 degrees Farenheit, depending on the temperature of the incoming water. However, an upgraded temperature sensor is available for purchase allowing the Eccotemp L7 to reach temperatures of up to 160 degrees Farenheit.

Eccotemp L7 Outdoor Tankless Water Heater benefits:

• 2 year manufacturer warranty on the water heater
• 41,000 BTU
• Portable
• Includes CSA regulator for use with standard 20 lbs grill propane tank
• Battery igniter means no electricity needed
• On/Off chrome shower head included
• Stainless steel shower hose included
• Garden hose adapter included
• *Manual water temperature control

Eccotemp L7 Dimensions:

• Height 19.5"
• Width 13.5"
• Depth 6.5"
• Weight approx. 13 lbs.
• Shipping weight 14.7 lbs.

Clearance Requirements (at least):

• 2" clearance from wall
• 1' on both sides from anything flammable
• 3' from any window, overhand, awning
• 18" from the ground

Flojet 2.9 GPM 12V Pump

Flojet 2.9 gallons per minute at 50 PSI pump. This unit works great with the Eccotemp L5, L7 and L10 models. Built-in pulsation eliminator ensures smooth flow without the need for an accumulator tank. Soft, absorbing mounts reduce annoying vibration and noise while running. Self-priming pump can safely run dry. Snap-in ½" port fittings simplify installation. Made of corrosion resistant materials.

Some of its features include:

Self-Priming, Dry Running, Soft Noise Absorbing, Mounts Snap-in Port Fittings, Built-in Bypass: Less Pulsation Reduces need for accumulator tank Corrosion Resistant Materials Meets ISO 8846 (Ignition Protection)