Eccotemp High Capacity L10 Tankless Water Heater - Free Shipping

L10 - High Capacity Tankless Water Heater

This tankless unit is an ideal unit for hunting camps, lodges, RV, summer homes, lake cabins, barns, potting sheds, etc. Made for a more permanent installation, it comes with standard 1/2" NPT plumbing fittings. It also comes with a standard garden hose adapter and fits right to a 20 pound grill tank. Some of the other benefits include:

• 2 "D" cell battery ignition
• 2.65 gallons of hot water per minut
• Adjustable water temperature from 80-150 degrees F
• Adapter attaches to any standard garden house style nozzle
• Includes 9' CSA approved regulator
• Includes hot and regulator for attaching to standard LP tank
• 20 minute auto safety shut off timer
• Needs 30-80 PSI of water pressure

The Purpose and Benefits the L-10

The EccoTemp L-10 is a liquid propane fired water heater capable of delivering 2 to 2.65 gallons of hot water almost anywhere. The unit has standard 1/2“NPT pipe fittings and an adapter for using a standard garden hose for inlet water supply. The L-10 is not a toy. People around the world use similar units to heat the water in their homes, safely, and reliably. Gas is supplied from a standard 20 pound propane cylinder (not included) such as used with outdoor grills. A regulator with hose is furnished with the heater.

You may also plumb it in to existing water lines and using a low pressure LP gas regulator.. Check local codes for proper installation.

The unit includes a stainless steel rain cap that is to help venting of the flue gases as well as protect it for outdoor usage. Ignition is automatic and powered by 2 “D” cell batteries (not included). Burners come on when water flows, and off when the water is shut off. No pilot light!

Functions and Features

• Water controlled automatic ignition: Water pressure between 20-80 PSI opens the ignition circuit for easy and convenient operation
• Auto-cut-off protection: The auto-cut-off protection will shut the gas supply off immediately in the event of flameout to reduce the risk of gas leakage. There is also an automatic shut-off timer after 20 minutes of continuous use
• Energy savings: EF of 85%
• Removable drain valve to avoid water pipe and regulator damage caused by freezing water*
• Anti-dry combustion protection: The unit will shut off the gas supply in the event water stops flowing through the unit

*Read the maintenance section on draining the unit entirely to avoid freeze issues.

THE FUTURE OF EFFICIENCY

10 LITER OUTDOOR MOUNT LIQUID PROPANE WATER HEATER

Getting Started

1. Check box for damage. Damages caused in shipment must be reported immediately.
2. Make sure you have all the parts:
1. Water heater
2. LP gas regulator and hose
3. Rain cap
4. ½” NPT to garden hose adapter
5. Hardware pack
3. Install the rain cap to the top of the flue vent. The rain cap should fit securely. It is recommended that a beaded layer of high temperature sealant is used around the perimeter of the seal between the rain cap and the flue vent.
4. If using a standard garden hose, attach the ½” NPT to garden hose adapter to the fitting marked “Water Input”. Use “Teflon” tape or other approved sealing method on the threads for a secure, water tight fit. Check to make sure the screen inside the water inlet is in place and clean. Then attach your water input/garden hose.
5. Install gas supply line and regulator to the unit. DO NOT OVER TIGHTEN. OVER TIGHTING MAY CRACK THE GAS REGULATOR CAUSING A GAS LEAK! Check for any gas smell before ignition! Make sure it is screwed all the way on.